Controlled dump biogas | Pipelines and special parts | Regulation manifolds | Compact plants | Static torch
< Back
< Back
High temperature plants
| Item | Components | Notes |
| 1 | Frame | Carbon steel |
| 2 | Stack | Stainless steel with ceramic fibre |
| 3 | Manometer | |
| 4 | Vacuum meter | |
| 5 | Filter | Stainless steel |
| 6 | Compressor aspirator | |
| 7 | Flow rate meter | Optional |
| 8 | Regulation butterfly valve | |
| 9 | Main electro valve | |
| 10 | Secondary electro valve | |
| 11 | Differential pressure meter | Optional |
| 12 | Thermocouple | |
| 13 | Flame visualizer | |
| 14 | Starter | |
| 15.01 | Starter | |
| 15.02 | Burner | |
| 16 | Flame trap | |
| 17 | Connector block | |
| 18 | Frame | |
| 19 | Control panel |
High temperature biogas aspiration and combustion implant delivered on frame.
- Mod. INCHT 150 suitable for nominal flow rates up to 150 mc/h
- Mod. INCHT 250 suitable for nominal flow rates up to 250 mc/h
- Mod INCHT 500 suitable for nominal flow rates up to 500 mc/h
Technical standard features
Automatic functioning.
Automatic combustion air regulation.
Combustion temperature: 1200° C
Flame stop time > 0,3 sec.
Minimum rate CH4: 20 %
Aspirator pressure differential: 200 mbar
Fabrication standard features
The plant is built on steel carbon covered or hot-galvanized frame; filter, aspiration and delivery manifolds are made of stainless steel.
The stack is made of stainless steel lined with ceramic fibre, the regulation of the main combustion air is automatic, depending on the temperature of combustion, start is automatic and is controlled from the control panel provided of PLC for the management of the start/stop implant logics. In the standard version we have together with a flow rate meter, a panel provided with a ( monovuotometro ), a manometer and a plug for the connection of a portable biogas analyser.
Via Luigi Abbiati 43, 25121 Brescia (Italy) - Telephone: (+39) 030 9745811 - Fax: (+39) 030 9748480
